Greenhouse foil is a flat textile, consisting of HDPE strips coated with an LDPE layer.
Greenhouse foil is a flat textile, consisting of HDPE strips coated with an LDPE layer.
Thanks to the reinforcing grid, it is considerably stronger than ordinary foils. Individual types differ in weave, picks per inch, appearance, weight, width, and the contents of additives. Color variants are also possible.
Under normal conditions and if contact with chemicals is avoided, the service life can be more than 4 years. All foils contain UV stabilizers.
Our greenhouse foil can normally be used at temperatures from -50 to +70 °C. Attention: A minimum distance of 1 m from any heat source must be maintained at all time. The foil has virtually zero moisture absorption capacity.
Do not hesitate to contact our sales representatives or fill in the inquiry form.
Common material for the production of plastic greenhouses with a longer service life. It is one of the most popular types of our foils. We recommend using the optional ANTIFOG treatment, which prevents misting, i.e., the droplets slowly run down the surface of the foil instead of dripping on the plants. This contributes to significantly better light transmission and prevents the fungal diseases of plants. This material has a high durability and standard transparency thanks to the canvas weave.
Foil widths | 108 a 115 cm | 150 a 200 cm |
Weight | 135 g/m2 | 130 g/m2 |
Grid type | canvas weave | canvas weave |
Thermal stability | from -50 to +70 °C | from -50 to +70 °C |
This is the strongest and toughest material from our offer, thanks to the denser weave and higher weight. The increased density of the woven strips results in lower transparency; but, a long service life is thus guaranteed.
Foil widths | 108 cm | 150 cm |
Weight | 175 g/m2 | 165 g/m2 |
Grid type | canvas weave | canvas weave |
Thermal stability | from -50 to +70 °C | from -50 to +70 °C |
This type of film uses a perline weave (mesh approx. 1×1 cm) and a higher LDPE coating, which ensures a longer life of the film even when using perline fabric with lower strength. Thanks to the perline weave, higher transparency of the film is achieved.
Foil widths | 100, 150 and 200 cm | |
Weight | 110 - 310 g/m2 | |
Grid type | leno fabric 1×1 cm | |
Thermal stability | from -50 to +70 °C |